- Create USB Dongles with the Mersive Solstice App. The Solstice app for Windows and Mac laptops can also be run from a USB dongle with no installation, dependencies, or libraries required on the client laptop.
- Download OneDrive for macOS 10.12 or later and enjoy it on your Mac. Start with 5 GB of free cloud storage or upgrade to a Microsoft 365 subscription to get 1 TB of storage. Microsoft 365 includes premium Office apps, 1 TB cloud storage in OneDrive, advanced security, and more, all in one convenient subscription.
- Mac Software Update 10.10.5
- Download Mac Software Update Without Signing Invoice
- Download Mac Software Update Without Signing In Outlook
Installing updates in your Mac is a pretty straightforward exercise, which usually takes only a few clicks. In most cases, your Mac will alert you through a pop-up in the Notification Center when updates are available. Sometimes, you may find that an update has downloaded already, and your job is to install it.
Code signing your app assures users that it is from a known source and the app hasn't been modified since it was last signed. Before your app can integrate app services, be installed on a device, or be submitted to the App Store, it must be signed with a certificate issued by Apple.
Truly, macOS is getting better and smarter after each release, hence, earning a reputation as a robust OS. Despite this, macOS has its own problems; sometimes, there can be hiccups when installing updates.
Mac Stuck While Installing Updates
Some users have complained that a macOS update will not finish downloading. For some of them, their Macs get stuck midway of a macOS update. All they see is a progress bar that has stuck at 50%, or something similar. Please note that this issue has been reported to occur, even when users haven't initiated an update or upgrade.
What to Do If a Mac Update Will Not Finish Downloading
If you cannot finish downloading Mac updates for some reasons, then you need to check out the section below for our recommended solutions.
Preliminary Measures
Before performing any system update, be sure to create a backup of your sensitive data. You have two options to back up your Mac: Time Machine or a third-party Mac backup tool. Time Machine is already built into macOS. But if you encounter issues while using the built-in backup tool, there are several great alternatives.
Other than this, check if you have at least 30GB of free space before updating macOS. Sometimes, insufficient storage space could hinder the installation. If this is the likely reason, make some room by deleting unnecessary files in Safe Mode. First off, remove the partly downloaded macOS file from your Mac. Be sure to remove its icon from the Launchpad as well.
Alternatively, you can use a robust repair tool, such as TweakBit MacRepair, to automate the process. This tool will not only remove space hogs, such as unneeded apps, but it will also get rid of all the junk on your Mac to restore efficiency.
If your Mac is still frozen, here are some other ways to attack the problem and, hopefully, resolve the issue:
Step #1: Find Out If the Installation Process Is Still Going on
Before you conclude that your Mac has frozen, sit it out for a few more hours. As painful as it is, it may be the best solution to your purportedly aborted update. You need to realize that some updates can take up to 16 hours to complete. The progress bar only provides the best guess. Sometimes, things get slowed down by processes running behind the scenes. So, if your Mac stuck at 30% for the last few hours, it doesn't mean it is not installing the software.
Usually, when Apple releases a macOS update, many users rush to grab it, causing problems with Apple's servers. Taking this into account, you need to check the System Status page to see if there are any known issues.
You should also check if there is an issue with your connection. Sometimes, things are quicker when you are on a wired connection. On top of this, consider canceling the download, then start again.
Step #2: Refresh the Update
If the above trick didn't resolve the problem, try to jumpstart the stuck update. Here are the steps:
- Press and hold down the Power button for about 30 seconds.
- Press the Power button again to restart the computer.
- After it reboots, try installing the update again.
- To check if the macOS installation is still running, press the Command + L keyboard combination. This trigger will bring up more details about the update, such as the time remaining for the update to finish installing.
At times, while installing updates, Mac may freeze. If that is the case, then run through these steps:
- Restart your Mac via the above process.
- If nothing happens, go to the App Store and click Updates. The installation process will pick up from where it left off.
- Also, check the progress by pressing the Command + L combo again.
- Note that the App Store isn't the only place to get Mac software. You can get the same software from Apple's official site. The good thing about downloading software from Apple's website is that it has a Combo Updater, which has the essential system files to update macOS.
Step #3: Install Updates or macOS in Safe Mode
Mac Software Update 10.10.5
If you have established that, indeed, your Mac got stuck while installing the update, then the next thing you should try is to boot your Mac in Safe Mode. To do so, follow this process:
- Start your Mac, then immediately press and hold down the Shift key.
- Release the key when you see the login window.
- Your Mac will now boot into Safe Mode, where you can fix your issue.
Step #4: Reset the NVRAM
Download Mac Software Update Without Signing Invoice
If the problem is still present, try resetting the NVRAM. The Non-Volatile Random Access Memory (NVRAM) is a memory section that your Mac uses to store specific settings like screen resolution and volume settings.
To reset the NVRAM, follow the steps below:
- Restart your computer, then immediately, after you hear the startup sound, hold down the Command + Option + P + R keyboard shortcut.
- Release the keys when you hear the startup sound again. The NVRAM will reset, and your Mac will restart automatically.
- The update should resume.
Step #5: Reinstall macOS in Recovery Mode
If nothing else works, then your best shot is to reinstall the updates in Recovery Mode. Here is how to do it:
- Shut down your Mac.
- Restart the computer, then hold down the Command + R combo immediately to enter Recovery Mode.
- Once in Recovery Mode, you will see some options. Pick Install new OS to reinstall macOS.
- When the process completes, everything should be fine.
Step #6: Clean Install macOS from External Drive
If the macOS update will still not finish downloading, try reinstalling the OS from an external drive. To perform a clean installation of macOS, you need to create a bootable USB installer drive. This drive should have at least 12GB of storage space. Once the USB is ready, here is what you should do to format the drive using the journaled extended format:
- Download the macOS from the App Store.
- Connect the USB drive to your computer.
- Go to Applications and choose Disk Utility.
- Now, select thumb drive > Format.
- After that, name your USB as Untitled, and then choose OS X Extended.
- Click Erase to continue.
- Your USB is now formatted, so you can open the Terminal and try downloading macOS again.
Wrapping Up
While hiccups rarely occur while installing updates, it is always good to know what to do if a Mac update will not finish downloading. Hopefully, the above steps helped you to get the installation back on track. But if macOS update will not finish downloading even after attempting the above solutions, there is no need to panic. Just raise the problem with Apple Support.
If you encounter any issue while resolving the problem, let us know in the comments section below.
See more information about Outbyte and uninstall instructions. Please review EULA and Privacy Policy.
By Selena KomezUpdated on November 21, 2019
Download Mac Software Update Without Signing In Outlook
There are many situations that we will make in daily,and need to install IPSW file on our iPhone/iPad,for example update iPhone from iOS 12 to iOS 13; download and install iOS 13 on iPhone, install iOS 12 on iPhone/iPad; downgrade iOS 13 to iOS 12 on iPhone and iPad; fix the software update failed error; get iPhone out of recovery mode/DFU mode; fix iPhone/iPad stuck in black screen of death; fix iPhone stuck at Apple logo; repair an iPhone stuck at looping on start; fix device abnormal system issue; failed restore device to factory reset, as well as fix iPhone stuck on recovery mode after iOS 13 update. You would be required to downgrade from iOS 13 to iOS 12, in order to fix/restore iPhone back to factory setting status. Whatever the case, we'll walk you through the entire process to fix bricked iPhone/iPad and gets it back to normal status by re-installing IPSW files(firmware package) on iPhone/iPad with/without iTunes.But before we get into those,be sure to backup your device, in case something goes wrong during the procedure.We highly recommend that you don't move forward until or unless you've made a proper backup of your device.
You may want to know:How to Backup iPhone to Computer
* 2 Ways to Downgrade your iPhone with Losing Data
* How to Recover Deleted Data on iPhone
* How to Restore iPhone Data from iTunes Backup
Download & install iOS IPSW File Manually for iPhone, iPad
There are a few routes you can take when it comes to installation of iOS.The manually one is to download & install iOS IPSW file on iPhone/iPad with iTunes,it's easy to complete the restoring task via iTunes on device.However,it gain the big chance to lost data from device after using IPSW file to restore the jailbroken iPhone/iPad with iTunes.Below we have shown method on how to download & install iOS iPSW file manually for iPhone /iPad with iTunes.
Note:Backup iPhone before installing IPSW file on iPhone with iTunes
Part 1:Install IPSW File on iPhone iPad With iTunes (Lead to Data Loss)
Step 1.Download the iOS IPSW file[ links below ] that relates to your specific iOS device.
Step 2.Run iTunes.
Step 3.Connect your device to the computer.
Step 4.Open Device Summary for the iOS device you are updating.
Step 5.Hold down the SHIFT [ Windows ] or ALT [ Mac ] key and click Restore in iTunes simultaneously iTunes restore.
Step 6.Locate the iOS IPSW file you downloaded and select it.
Step 7.Follow the on onscreen instructions and iTunes will begin the update process.
Step 8.When the update has finished, your iOS device will reboot into the iOS you select.
Please download the .IPSW files:
iOS firmware file for iPhone
iOS firmware file for iPad
iOS firmware file for iPod touch
Part 2:Install IPSW File on iPhone iPad Without iTunes (No Data Loss)
Another better way to use IPSW file to restore iPhone/iPad without iTunes is install IPSW file on device via IPSW Files Installation Tools or IPSW Restore Tool – iOS System Recovery.No matter the jailbroken or non-jailbroken iDevice,it will not lead to data loss in the whole restoring process.IPSW Files Installation Tools-iOS System Recovery perfectly help to install IPSW file on iPhone/iPad without iTunes,so you can use this auxiliary tools to update or downgrade your iOS devices without data loss, including the latest iOS 12 and iOS 12.1. What's more,this program allow to restore deleted data from iPhone/iPad completely after losing data under any circumstances.Additionally,it also designed for restore iOS system to normal state on iPhone/iPad.
Features of iOS System Recovery:
* Provides the latest iOS 11 firmware package .IPSW files downloading and install on iPhone/iPad without data loss;
* Install IPSW file on iPhone/iPad without data loss;
* Fix/Repair iPhone iPad device stuck in Recovery Mode;
* Get iPhone iPad out of Apple Logo screen/ iTunes screen/ loading screen/ white screen;
* Fix iPhone iPad can't enter the system;
* Without any data loss during the repairing process.
* Provides three recovery mode for lost contacts, iMessages/SMS/MMS, photos, videos, call logs, notes, etc, on iPhone iPad device: Directly recover data on iPhone iPad device; Restore data from iTunes backup; Retrieve data from iCloud backup.
* Supported iPhone, iPad devices: iPhone 11/iPhone 11 Pro(Max), iPhone XS/XS Max/X/8/7/6S/6S Plus/6/6 Plus/5S/5C/5/4S, iPad Air 2/3, iPad Pro 3, iPad Mini, iPod Touch 4/5, etc.
The following part we will take an example on how to install iOS 10.3.3 IPSW file on iPhone with IPSW Files Installation Tools-iOS System Recovery.
Easy Steps to Download and Install iOS 9/iOS 10 IPSW File on iPhone without Data Loss
Step 1.Run the IPSW Files Installation Tools and Connect iPhone to Computer
Step 2.Select iOS 12/11/10/9 Firmware Files and Download to iPhone
Tips:The program provides iOS 10.3.3 and the newest iOS 11 official version firmware package for download.
1)If you want to install iOS 10 on your iPhone directly,please click the 'Download Download adobe cs6 master collection mac. ' button to download the iOS 10.3.3 firmware files for your iPhone.
2)If you want to install iOS 10/iOS 9 or other older IPSW file on iPhone,please select and install the .IPSW files on your iPhone via IPSW Files Installation Tools(no data loss),then save it on your computer.
Please download the .IPSW files in below download page:
iOS firmware file for iPhone
iOS firmware file for iPad
iOS firmware file for iPod touch
Step 3.Locate the Downloaded iOS 9/iOS 10 or iOS 11 .IPSW File from PC to Program
To install the iOS 9 or iOS 10 .IPSW File on your iPhone,please click the 'Select' button the import the files to the IPSW Files Installation Tools and going on.
Tips:If you want to install iOS 10.3.3 on your iPhone, iPad or iPod touch,please select,download and install it on your iOS devices directly,during the installing process,it won't cause data loss.
Step 4.Install the iOS 11/10/9 IPSW File on iPhone without Data Loss
Note:Once finish this restoring job, your iPhone/iPad/iPod Touch will be updated to the iOS version which you select. If your iOS device is a jailbroken one, then it will be updated to non-jailbroken.If you have unlocked your iOS device before, then it will be re-locked again.
Free download the IPSW Files Installation Tools and have a try!
Part 3: Install iOS Firmware Package to Unlock iPhone by using UkeySoft Unlocker
Some professional iPhone unlocking tools like UkeySoft Unlocker unlock iPhone by installing IPSW (iOS Firmware Package), so you can downgrade/update your iPhone through downloading and installing firmware package by using UkeySoft Unlocker, which is a good choice to install IPSW files on your iPhone, iPad and iPod touch at ease.
UkeySoft Unlocker is designed to unlock iPhone/iPad/iPod lock screens in different situations: locked, disabled, broken screen, black screen, unresponsive screen, Apple logo screen, recovery mode, DFU mode, etc. If your iPhone is disable, or you forget your iPhone screen passcode. Don't worry, UkeySoft Unlocker can help you fix and unlock your disable/locked iPhone at ease.
How does UkeySoft work? Actually, UkeySoft Unlocker can help you download the matching firmware of your iPhone, iPad or iPod touch device, then re-install the downloaded firmware package to the device, your iPhone will unlock and restore to normal status after installing iOS firmware package completed.
More Features:
- Remove screen passcode from iPhone and iPad.
- Unlock your disabled iPhone at home, no tech knowledge required.
- Remove iPhone passcode from locked, disabled, broken screen.
- Unlock Apple ID without password.
- Bypass iCloud activation lock in iOS 13, 12, 11 or Earlier.
- Compatible with all iOS devices and the latest iOS 13.
- Offers iOS 13, iOS 12, iOS 11 firmware package to download.
- Directly reinstall firmware package, restore and unlock iPhone.
What to Do If a Mac Update Will Not Finish Downloading
If you cannot finish downloading Mac updates for some reasons, then you need to check out the section below for our recommended solutions.
Preliminary Measures
Before performing any system update, be sure to create a backup of your sensitive data. You have two options to back up your Mac: Time Machine or a third-party Mac backup tool. Time Machine is already built into macOS. But if you encounter issues while using the built-in backup tool, there are several great alternatives.
Other than this, check if you have at least 30GB of free space before updating macOS. Sometimes, insufficient storage space could hinder the installation. If this is the likely reason, make some room by deleting unnecessary files in Safe Mode. First off, remove the partly downloaded macOS file from your Mac. Be sure to remove its icon from the Launchpad as well.
Alternatively, you can use a robust repair tool, such as TweakBit MacRepair, to automate the process. This tool will not only remove space hogs, such as unneeded apps, but it will also get rid of all the junk on your Mac to restore efficiency.
If your Mac is still frozen, here are some other ways to attack the problem and, hopefully, resolve the issue:
Step #1: Find Out If the Installation Process Is Still Going on
Before you conclude that your Mac has frozen, sit it out for a few more hours. As painful as it is, it may be the best solution to your purportedly aborted update. You need to realize that some updates can take up to 16 hours to complete. The progress bar only provides the best guess. Sometimes, things get slowed down by processes running behind the scenes. So, if your Mac stuck at 30% for the last few hours, it doesn't mean it is not installing the software.
Usually, when Apple releases a macOS update, many users rush to grab it, causing problems with Apple's servers. Taking this into account, you need to check the System Status page to see if there are any known issues.
You should also check if there is an issue with your connection. Sometimes, things are quicker when you are on a wired connection. On top of this, consider canceling the download, then start again.
Step #2: Refresh the Update
If the above trick didn't resolve the problem, try to jumpstart the stuck update. Here are the steps:
- Press and hold down the Power button for about 30 seconds.
- Press the Power button again to restart the computer.
- After it reboots, try installing the update again.
- To check if the macOS installation is still running, press the Command + L keyboard combination. This trigger will bring up more details about the update, such as the time remaining for the update to finish installing.
At times, while installing updates, Mac may freeze. If that is the case, then run through these steps:
- Restart your Mac via the above process.
- If nothing happens, go to the App Store and click Updates. The installation process will pick up from where it left off.
- Also, check the progress by pressing the Command + L combo again.
- Note that the App Store isn't the only place to get Mac software. You can get the same software from Apple's official site. The good thing about downloading software from Apple's website is that it has a Combo Updater, which has the essential system files to update macOS.
Step #3: Install Updates or macOS in Safe Mode
Mac Software Update 10.10.5
If you have established that, indeed, your Mac got stuck while installing the update, then the next thing you should try is to boot your Mac in Safe Mode. To do so, follow this process:
- Start your Mac, then immediately press and hold down the Shift key.
- Release the key when you see the login window.
- Your Mac will now boot into Safe Mode, where you can fix your issue.
Step #4: Reset the NVRAM
Download Mac Software Update Without Signing Invoice
If the problem is still present, try resetting the NVRAM. The Non-Volatile Random Access Memory (NVRAM) is a memory section that your Mac uses to store specific settings like screen resolution and volume settings.
To reset the NVRAM, follow the steps below:
- Restart your computer, then immediately, after you hear the startup sound, hold down the Command + Option + P + R keyboard shortcut.
- Release the keys when you hear the startup sound again. The NVRAM will reset, and your Mac will restart automatically.
- The update should resume.
Step #5: Reinstall macOS in Recovery Mode
If nothing else works, then your best shot is to reinstall the updates in Recovery Mode. Here is how to do it:
- Shut down your Mac.
- Restart the computer, then hold down the Command + R combo immediately to enter Recovery Mode.
- Once in Recovery Mode, you will see some options. Pick Install new OS to reinstall macOS.
- When the process completes, everything should be fine.
Step #6: Clean Install macOS from External Drive
If the macOS update will still not finish downloading, try reinstalling the OS from an external drive. To perform a clean installation of macOS, you need to create a bootable USB installer drive. This drive should have at least 12GB of storage space. Once the USB is ready, here is what you should do to format the drive using the journaled extended format:
- Download the macOS from the App Store.
- Connect the USB drive to your computer.
- Go to Applications and choose Disk Utility.
- Now, select thumb drive > Format.
- After that, name your USB as Untitled, and then choose OS X Extended.
- Click Erase to continue.
- Your USB is now formatted, so you can open the Terminal and try downloading macOS again.
Wrapping Up
While hiccups rarely occur while installing updates, it is always good to know what to do if a Mac update will not finish downloading. Hopefully, the above steps helped you to get the installation back on track. But if macOS update will not finish downloading even after attempting the above solutions, there is no need to panic. Just raise the problem with Apple Support.
If you encounter any issue while resolving the problem, let us know in the comments section below.
See more information about Outbyte and uninstall instructions. Please review EULA and Privacy Policy.
By Selena KomezUpdated on November 21, 2019
Download Mac Software Update Without Signing In Outlook
There are many situations that we will make in daily,and need to install IPSW file on our iPhone/iPad,for example update iPhone from iOS 12 to iOS 13; download and install iOS 13 on iPhone, install iOS 12 on iPhone/iPad; downgrade iOS 13 to iOS 12 on iPhone and iPad; fix the software update failed error; get iPhone out of recovery mode/DFU mode; fix iPhone/iPad stuck in black screen of death; fix iPhone stuck at Apple logo; repair an iPhone stuck at looping on start; fix device abnormal system issue; failed restore device to factory reset, as well as fix iPhone stuck on recovery mode after iOS 13 update. You would be required to downgrade from iOS 13 to iOS 12, in order to fix/restore iPhone back to factory setting status. Whatever the case, we'll walk you through the entire process to fix bricked iPhone/iPad and gets it back to normal status by re-installing IPSW files(firmware package) on iPhone/iPad with/without iTunes.But before we get into those,be sure to backup your device, in case something goes wrong during the procedure.We highly recommend that you don't move forward until or unless you've made a proper backup of your device.
You may want to know:How to Backup iPhone to Computer
* 2 Ways to Downgrade your iPhone with Losing Data
* How to Recover Deleted Data on iPhone
* How to Restore iPhone Data from iTunes Backup
Download & install iOS IPSW File Manually for iPhone, iPad
There are a few routes you can take when it comes to installation of iOS.The manually one is to download & install iOS IPSW file on iPhone/iPad with iTunes,it's easy to complete the restoring task via iTunes on device.However,it gain the big chance to lost data from device after using IPSW file to restore the jailbroken iPhone/iPad with iTunes.Below we have shown method on how to download & install iOS iPSW file manually for iPhone /iPad with iTunes.
Note:Backup iPhone before installing IPSW file on iPhone with iTunes
Part 1:Install IPSW File on iPhone iPad With iTunes (Lead to Data Loss)
Step 1.Download the iOS IPSW file[ links below ] that relates to your specific iOS device.
Step 2.Run iTunes.
Step 3.Connect your device to the computer.
Step 4.Open Device Summary for the iOS device you are updating.
Step 5.Hold down the SHIFT [ Windows ] or ALT [ Mac ] key and click Restore in iTunes simultaneously iTunes restore.
Step 6.Locate the iOS IPSW file you downloaded and select it.
Step 7.Follow the on onscreen instructions and iTunes will begin the update process.
Step 8.When the update has finished, your iOS device will reboot into the iOS you select.
Please download the .IPSW files:
iOS firmware file for iPhone
iOS firmware file for iPad
iOS firmware file for iPod touch
Part 2:Install IPSW File on iPhone iPad Without iTunes (No Data Loss)
Another better way to use IPSW file to restore iPhone/iPad without iTunes is install IPSW file on device via IPSW Files Installation Tools or IPSW Restore Tool – iOS System Recovery.No matter the jailbroken or non-jailbroken iDevice,it will not lead to data loss in the whole restoring process.IPSW Files Installation Tools-iOS System Recovery perfectly help to install IPSW file on iPhone/iPad without iTunes,so you can use this auxiliary tools to update or downgrade your iOS devices without data loss, including the latest iOS 12 and iOS 12.1. What's more,this program allow to restore deleted data from iPhone/iPad completely after losing data under any circumstances.Additionally,it also designed for restore iOS system to normal state on iPhone/iPad.
Features of iOS System Recovery:
* Provides the latest iOS 11 firmware package .IPSW files downloading and install on iPhone/iPad without data loss;
* Install IPSW file on iPhone/iPad without data loss;
* Fix/Repair iPhone iPad device stuck in Recovery Mode;
* Get iPhone iPad out of Apple Logo screen/ iTunes screen/ loading screen/ white screen;
* Fix iPhone iPad can't enter the system;
* Without any data loss during the repairing process.
* Provides three recovery mode for lost contacts, iMessages/SMS/MMS, photos, videos, call logs, notes, etc, on iPhone iPad device: Directly recover data on iPhone iPad device; Restore data from iTunes backup; Retrieve data from iCloud backup.
* Supported iPhone, iPad devices: iPhone 11/iPhone 11 Pro(Max), iPhone XS/XS Max/X/8/7/6S/6S Plus/6/6 Plus/5S/5C/5/4S, iPad Air 2/3, iPad Pro 3, iPad Mini, iPod Touch 4/5, etc.
The following part we will take an example on how to install iOS 10.3.3 IPSW file on iPhone with IPSW Files Installation Tools-iOS System Recovery.
Easy Steps to Download and Install iOS 9/iOS 10 IPSW File on iPhone without Data Loss
Step 1.Run the IPSW Files Installation Tools and Connect iPhone to Computer
Step 2.Select iOS 12/11/10/9 Firmware Files and Download to iPhone
Tips:The program provides iOS 10.3.3 and the newest iOS 11 official version firmware package for download.
1)If you want to install iOS 10 on your iPhone directly,please click the 'Download Download adobe cs6 master collection mac. ' button to download the iOS 10.3.3 firmware files for your iPhone.
2)If you want to install iOS 10/iOS 9 or other older IPSW file on iPhone,please select and install the .IPSW files on your iPhone via IPSW Files Installation Tools(no data loss),then save it on your computer.
Please download the .IPSW files in below download page:
iOS firmware file for iPhone
iOS firmware file for iPad
iOS firmware file for iPod touch
Step 3.Locate the Downloaded iOS 9/iOS 10 or iOS 11 .IPSW File from PC to Program
To install the iOS 9 or iOS 10 .IPSW File on your iPhone,please click the 'Select' button the import the files to the IPSW Files Installation Tools and going on.
Tips:If you want to install iOS 10.3.3 on your iPhone, iPad or iPod touch,please select,download and install it on your iOS devices directly,during the installing process,it won't cause data loss.
Step 4.Install the iOS 11/10/9 IPSW File on iPhone without Data Loss
Note:Once finish this restoring job, your iPhone/iPad/iPod Touch will be updated to the iOS version which you select. If your iOS device is a jailbroken one, then it will be updated to non-jailbroken.If you have unlocked your iOS device before, then it will be re-locked again.
Free download the IPSW Files Installation Tools and have a try!
Part 3: Install iOS Firmware Package to Unlock iPhone by using UkeySoft Unlocker
Some professional iPhone unlocking tools like UkeySoft Unlocker unlock iPhone by installing IPSW (iOS Firmware Package), so you can downgrade/update your iPhone through downloading and installing firmware package by using UkeySoft Unlocker, which is a good choice to install IPSW files on your iPhone, iPad and iPod touch at ease.
UkeySoft Unlocker is designed to unlock iPhone/iPad/iPod lock screens in different situations: locked, disabled, broken screen, black screen, unresponsive screen, Apple logo screen, recovery mode, DFU mode, etc. If your iPhone is disable, or you forget your iPhone screen passcode. Don't worry, UkeySoft Unlocker can help you fix and unlock your disable/locked iPhone at ease.
How does UkeySoft work? Actually, UkeySoft Unlocker can help you download the matching firmware of your iPhone, iPad or iPod touch device, then re-install the downloaded firmware package to the device, your iPhone will unlock and restore to normal status after installing iOS firmware package completed.
More Features:
- Remove screen passcode from iPhone and iPad.
- Unlock your disabled iPhone at home, no tech knowledge required.
- Remove iPhone passcode from locked, disabled, broken screen.
- Unlock Apple ID without password.
- Bypass iCloud activation lock in iOS 13, 12, 11 or Earlier.
- Compatible with all iOS devices and the latest iOS 13.
- Offers iOS 13, iOS 12, iOS 11 firmware package to download.
- Directly reinstall firmware package, restore and unlock iPhone.
Guide: Re-install Firmware Package to Unlock a Disabled iPhone
Step 1: Download and Launch the Software
The first thing you should do is download and launch UkeySoft Unlocker on your computer.
Step 2: Connect iPhone to Computer
Click 'Unlock Screen Passcode' function, then connect your iPhone to your computer.
Step 3: Enter Recovery Mode on iPhone
Switch off your phone. After your iPhone is switched off, press and hold the volume down button along with Power button for nearly 10 seconds. After the 10 seconds, you need to release the power button and keep holding the volume down button.
Also read: how to put other iPhone into recovery mode
Step 4: Download Firmware Package
The software will show the information for your iPhone. If all the details are correct, click on the 'Download' button to download the firmware.
Start downloading firmware package for the iPhone.
Step 5: Firmware Package Downloaded Completed
Firmware package download complete! Everything goes well, just click 'Start' button to go on.
Tips: Or, you can click the 'Copy Link' button and paste it into the browser to download the firmware package via the browser. After downloading complete, then click 'Select' button to view and import the downloaded iOS Firmware package.
Step 6: Start Install Firmware Package to iPhone
When it finish verifying, click the 'Start Unlock' button to begin installing the download IPSW firmware package to your iPhone.
Step 7: Removing Screen Passcode
The software will install the IPSW files to the iPhone and unlock your iPhone.
Step 8: iPhone Restarts automatically
When you see below window, the passcode has been erased from your device successfully. The device is unlocked. It will take a few minutes to restart your device. After your iPhone restart, please go ahead to set your iPhone and access it.
Also read: How to Reset Locked iPhone without Passcode
Related Article:
Comments
Prompt: you need to log in before you can comment.
No account yet. Please click here to register.
